Optical fiber laser cutting machine is most suitable for cutting metal plates within 20mm. If the thickness is too thick, the ROI is not appropriate. If the thickness is too large, the precision requirement is not high. You can choose plasma or flame cutting machine to cut thick metal plates. 1530 or 1560 is a common format size, and the accuracy is usually 0.005mm. At this time, the manufacturer wants to remind you of two questions:

First, does one word of variance budget cost more than 800000 pounds? Do you think it is appropriate?

We have a customer in Shandong who called our technician and asked about cutting 12-16mm stainless steel, which requires at least 6000W laser cutting machine. Then we asked the customer a question: What is the thickness of the steel plate you often cut? What is the cutting thickness for the largest proportion of businesses? Our customer said that the thickness is 4 to 8mm, and we can recommend 2000 watt equipment to the customer. So I asked: Well, what is the proportion of 12 to 16 mm stainless steel in all your cutting businesses? Is there more than 10%? The customer said he didn't know, but it was almost no more than 10%. We said that if we cut 12 to 16 watts, we must recommend 6000 watts. The price of 6000 watts is at least twice that of 3000 watts. If we want to cut 4 to 82000 watts to 3000 watts, it is enough. The price is twice as cheap, which is the difference between 500000 and 1 million. However, we usually leave room for laser power to prevent attenuation. We would like to recommend 30 million yuan. That is, if you do not clearly indicate that you want to spend more than 500000 yuan for 10% of the products, we recommend that the main processing thickness be used as the standard to save costs. At the same time, the plate thickness is 12~16, and the accuracy is not high. Is it necessary to use laser equipment for cutting? Occasionally, if you encounter processing materials with special requirements, you can also go to the machining center and let others handle them. Isn't it more cost-effective than buying them yourself?

Second, can the maximum thickness be cut with good cutting surface quality?

If you want to cut the best section, you must give 40% discount to all data. That is, if you want to pursue a smooth and beautiful cutting effect, take the 500W equipment as an example. When the cutting thickness reaches three, you can ensure that it is smooth. When it reaches four, it will not be very smooth. For another example, when the cutting thickness of 3000 watts is less than 12 mm, we can achieve what we call high-quality cutting (that is, continuous and stable cutting). If you are still unclear, you can consult our factory technicians. The high-quality cutting thickness is not equal to the maximum cutting thickness. If you are fooled by bad merchants to buy a product that is lower than the requirements you need, you cannot make a hole or cut the steel plate. What are you doing with this machine?