As soon as the summer of 2019 begins, the temperature begins to rise gradually. Many mechanical equipment may heat up during use, which is likely to cause some minor failures. Therefore, in order to avoid the failure of the laser cutting machine in summer, we need to pay attention to the maintenance and repair of the laser cutting machine, so as to extend its service life.

Daily maintenance skills of laser cutting equipment:

1. As the temperature rises in summer, the working pressure of the cooling system of the laser cutting machine increases. It is recommended to maintain the pressure of the cooler before the high temperature comes. The pressure of equipment from different manufacturers is also different. It is recommended to consult the specific parameters of the equipment manufacturer before maintenance.

2. Make sure that the laser tube is full of circulating water before the machine works. The quality and temperature of the circulating water directly affect the service life of the laser tube. Therefore, the circulating water shall be replaced regularly and the water tank shall be cleaned. This is best done once a week.

3. There will be some mirrors and focus mirrors on the machine. The laser is reflected and focused by these lenses and then emitted from the laser hair. The lens is easy to be stained with dust or other pollutants, causing laser loss or lens damage. So clean the lenses every day. Pay attention to:

<1. The lens should be gently wiped to avoid damaging the surface coating;

<2. The wiping process shall be handled with care to prevent falling;

<3. Keep the concave side downward when installing the focusing mirror.

4. Due to the high temperature in summer, the deterioration rate of cooling water will also be accelerated. It is recommended that users of laser cutting machines use distilled water or pure water, and regularly clean the scale, so as not to cause scaling in the laser pipe and affect the laser power. Different types of laser cutting machines have different methods for cleaning scale, and they need to be operated under the guidance of the manufacturer.

5. As the dust of the laser cutting machine is mainly metal powder, it is recommended to regularly clean the dust in the electrical cabinet of the laser cutting machine and check the working condition of the cooling fan.

Big surrounding laser cutting machine

Regular maintenance of the equipment can avoid some problems in the use of the laser cutting machine, increase the service life of some accessories and equipment performance, and also increase the working efficiency of the equipment. Therefore, in addition to the maintenance of the laser cutting machine in summer, we should also regularly carry out routine maintenance of the laser cutting machine.