Optical fiber laser cutting machine has now become an indispensable production equipment in the contemporary sheet metal processing and manufacturing industry. With the upgrading of the industrial chain and the improvement of the production and processing regulations, Longtai Laser Equipment Co., Ltd. has successfully released a new generation of optical fiber laser cutting machine after many years of design and product research and development. The dual platform structure has not only greatly improved the efficiency of loading and unloading, It also ensures security and intelligence at the level of improving the actual operation experience.
Longtai will explain the operation process of the optical fiber laser cutting machine
1. Define the raw materials that must be produced and processed, fix the sheet metal parts and put them flat on the edge of the processing equipment bed, and then define the cointegration of the placement of raw materials, to prevent vibration in the whole process of laser cutting, which causes the laser cutting precision to fail to meet the requirements.
2. Operate the control panel, load the main parameters such as the product laser cutting pattern and the thickness of the laser cutting raw materials, then adjust the laser cutting head to the appropriate key parts, and then self adjust and adjust the vertical centering of the nozzle.
3. Turn on the regulated power supply and its industrial chiller, and set the temperature and pressure of the industrial chiller.
4. Start the laser generator, and then turn on the CNC machine tool.
Some Common Faults and Difficulties of Optical Fiber Laser Cutting Machine
However, in the actual operation process, it takes a lot of time to train. After the actual operation of the optical fiber laser cutting machine, there will be some common failures and problems. Here is a detailed introduction.
1. No response of startup equipment
Check whether the switch power supply fuse tube is burnt: remove and replace the fuse tube.
Whether the switching power supply is normal: check the switching power supply and make it normal.
Whether the main power switch is damaged: replace the main power switch.
2. No laser output or the laser is too weak
Check whether the light path is offset: carefully adjust the light path. Whether the focal length of the focusing lens of the machine equipment changes: adjust the focal length of the lens again.
Check whether the laser diode is damaged or brittle: replace the laser diode.
Whether the laser generator is plugged in: check the control circuit of the power supply system of the laser generator to ensure that everything is normal.
Whether the laser generator is damaged: replace the laser generator.
If the production and processing specifications are deviated or the posture is incorrect, and the signal line is normal: replace the signal line.
The switching power supply of the power supply system is unstable or has electromagnetic interference: refit the regulated power supply or remove the electromagnetic interference.