What should be paid attention to in the details of safe operation of optical fiber laser cutting machine?

1. The operator must be trained, familiar with the equipment structure and performance, and master the knowledge related to the operating system;

2. Observe the general safety operation rules for laser equipment. Start the laser strictly according to the starting procedure of the laser;

3. Wear labor protection articles as required, and wear protective glasses that meet the requirements near the laser beam.

4. Do not process a material before knowing whether it can be irradiated or heated by laser, so as to avoid the potential danger of smoke and steam;

5. When using gas cylinders, avoid crushing welding wires to avoid electric leakage accidents. The use and transportation of gas cylinders shall comply with the regulations. Gas cylinders shall not be exposed to the sun or close to heat sources. When opening the bottle valve, the operator must stand at the side of the bottle mouth;

6. When the equipment is started, the operator shall not leave the post or entrust someone to be in charge without authorization. If it is really necessary to leave, stop the machine or cut off the power switch;

7. In case of any abnormality during processing, stop the machine immediately, eliminate the fault in time or report to the supervisor;

8. Keep the laser, bed and surrounding site clean, orderly and free of oil stain, and stack workpieces, plates and waste materials as required;

9. High voltage safety regulations shall be observed during maintenance. The maintenance shall be carried out every 40 hours of operation or every week, every 1000 hours of operation or every six months according to the regulations and procedures;

10. Keep the fire extinguisher within easy reach; Turn off the laser or shutter when not processing; Do not place paper, cloth or other combustibles near the unprotected laser beam;

11. After the new workpiece program is input, it shall be tested first and its operation shall be checked;

12. After startup, manually start the machine tool at low speed in X and Y directions, and check whether there is any abnormality;

13. During operation, observe the operation of the machine tool to avoid accidents caused by the cutting machine going out of the effective travel range or collision between two machines.

Liaocheng Longtai Laser Equipment Co., Ltd., located in Jiaming Industrial Park, Dongchangfu District, Liaocheng, Shandong Province, is a professional manufacturer of laser marking machines, laser engraving machines and laser cutting machines. The company adopts advanced technologies at home and abroad to engage in the R&D and production of laser equipment, and provides a complete set of laser cutting and carving solutions and supporting facilities for customers around the world. We have established long-term stable and interactive cooperation with IPG, Wuhan Ruike, Shenzhen Chuangxin, etc., to ensure the quality and service level of the technology and equipment provided.

Longtai's main products include CO2 series laser marking machine, laser engraving machine, optical fiber series laser marking machine, metal laser cutting machine, laser pipe cutting machine and other sheet metal processing equipment. It is widely used in various industries: profile and pipe industry, cable industry, food and beverage industry, pharmaceutical industry, packaging and printing industry, electrical and electronic products industry, metal products industry, auto parts industry, handicraft industry, clothing industry, etc.