The influence of uneven metal plate density on optical fiber laser cutting machine? Some customers cut some parts in the process of cutting, but some parts cannot be cut well. What is the reason? In fact, when metal cutting, the density of metal plate still has a relatively large impact on optical fiber laser cutting. For example, if the density of stainless steel plate is high, its cutting difficulty coefficient is large. For the same plate, if its workmanship is poor, the internal density is different. Like some thick metal plates, the thickness is the same, but the internal structure of the plate is uneven. There may be some places with different densities. Therefore, in the processing time of the optical fiber laser cutting machine, if the density of the plates is different, the cutting may be impermeable, or the cutting seam may be different.

Therefore, the optical fiber laser cutting machine equipment has relatively high requirements for materials, and the cutting effect is different with slightly different material density or different plate shape and thickness.

Some metal sheets are cut with poor shape. It is difficult to control the material processing when optical fiber laser cutting machine is used. The shape of the plate is good, and the thickness of the material is uneven, which also affects the focal length of the machine. When cutting materials, it is necessary to flatten the plate as much as possible. Therefore, the processing of optical fiber laser cutting machine is still greatly affected by the density, and the higher the density is, the slower the cutting speed is.