Regular maintenance process of optical fiber laser cutting machine:

1. The dust screen of the water cooler shall be cleaned once every 15 days, and the water shall be changed once every 15 days.

2. Tighten screws and oil regularly.

3. Machine tool lubrication: press and hold SET all the time to display the first one: 20s, and add 20s once; Keep pressing to display the second: 240min, one cycle; Press SET all the time to finish. Add oil (engine oil or gear oil) when it is under the label.

4. The guide rail and gear shall be maintained once a month: first blow with an air gun, then wipe with a rag, and finally brush with a brush.

Regular maintenance of the optical fiber laser cutting machine can significantly extend the service life of the equipment. The data survey shows that regular maintenance and servicing of the optical fiber cutting machine can save a large amount of equipment maintenance costs for enterprises, reduce the probability of errors during processing, more effectively improve the operating efficiency, and increase the level of enterprise benefits!