When a new customer first inspects a laser cutting machine, he or she generally requires on-site proofing to check the cutting speed and overall quality. What are the angles to judge whether a laser cutting machine is good or bad? Here's the answer

1: The laser cutting machine section will form lines, and the depth of the lines determines the roughness of the cutting material surface. The shallower the lines are, the smoother the section will be. The roughness not only affects the appearance of the finished product, but also affects the degree of friction. It is necessary to reduce the grain depth of the cutting section. The smoother the surface, the better the effect.

2: If the thickness of the cutting plate exceeds 10mm, the perpendicularity of the cutting edge is very important. In the cutting process, the laser head moves from far to near, from top to bottom, and the beam of focus becomes dispersed when it is further away. The closer the moving distance towards the target is, the more focused the beam becomes, which will produce vertical deviation. The smaller the vertical distance is, the stronger the performance of the machine will be.

3: The processing advantage of laser cutting machine is that the cutting burr is small, the efficiency is high, and the precision is high. When processing thick plates, the molten metal residue will appear at the lower part of the slope, which makes it impossible to blow away the hanging slag completely. After cooling, the cutting hanging slag and burr are formed. In general, the processing of such situations is to reduce the speed at the end of the cutting machine, and reduce the hanging slag and burr as much as possible, Therefore, the less slag and burr in the cutting process, the better the quality of the machine.