As a high precision cutting equipment, the laser cutting machine has brought many conveniences to many metal processing manufacturers. In the production process, some people may neglect some precautions when operating the laser cutting machine, which may cause the machine to malfunction or even shorten its service life. Moreover, improper operation will seriously affect the processing quality of the equipment, so if you want to make the equipment operate normally, you need to ensure that the operation process and method are correct. Here's a detailed introduction:

1. Strictly follow the instructions and the principles of starting and shutting down the laser cutting machine. Do not force the machine to be closed or turned on;

2. The operator shall not operate the machine and equipment without training, and can only operate the machine after complete training and qualification;

3. Adjust the light path and the cutting head according to the correct control process to ensure the safety of the machine;

4. Every time you start the machine, go back to the reference point, check and process the focusing lens, calibrate the coaxiality of the beam nozzle, open the cutting auxiliary gas, and the pressure in the bottle should not be less than 1Mpa;

5. Regularly check the guarantee gas of the external optical path of the laser cutting machine, the cold circuit cabinet, the air compressor, etc., and discharge the water in the filter.

Therefore, when you operate and use the laser cutting machine, you must pay attention to whether your own operation mode is correct, and pay close attention to it all the time during the whole operation process of the cutting machine, and timely find and handle any abnormal phenomenon.