How to improve the efficiency of the optical fiber laser marking machine in marking? When setting parameters, it is necessary to cooperate accurately to make the laser marking more perfect. What factors will affect the efficiency of our fiber laser marking machine?

1. Mark depth of optical fiber laser marking machine.

If the surface marking depth is slightly larger, it is necessary to increase the calibration parameters and laser power, which will take a certain amount of time to calibrate the depth, resulting in a decrease in the overall marking speed.

The optical cable laser marking machine improves the efficiency of daily work.

2. The optical fiber laser marking machine excites the optical marking machine to focus the spot. The spot passes through the spot of the focusing mirror, and the smaller the spot is, because the spot size is small. In fact, other interfering substances may have a slight impact on the spot quality.

3. The size of the marking content of the optical fiber laser marking machine. Marking large content will deflect the galvanometer to meet the requirements of larger marking. But this is slower than marking the missing content.

4. The label density of the optical fiber laser marking machine, relative to the marking speed, requires a long time for intensive marking. For uniform format marking, the sparse marking only takes 2 minutes with the UV laser marking machine, while the density may take 5 minutes. After all, the marking density is high.

The optical cable laser marking machine improves the efficiency of daily work.

Every day, we will tell you some common problems that should be paid attention to in the use of laser marking machines. These are some basic common sense problems, which need everyone's attention. Don't make the machine unusable because of some small problems.

1. Line problem; When using the laser marking machine, it is required that the voltage is stable and there must be no line fault in the middle. This technology requires users to regularly check the use of the line end pump laser marking machine, as well as some switches, to ensure that there are no problems during the use of the laser marking machine.

The optical cable laser marking machine improves the efficiency of daily work.

2. Switch on/off; If the marking machine is used frequently, it can be opened for a long time, but it can only be used after a short time. It is seen that some users only use the laser marking machine for a period of time a day, but the operation time is long, which is a great hazard to the use of the laser marking machine.

3. Regular inspection; This is a conventional project, which requires users to know some maintenance knowledge.