As we all know, laser cutting machines have been widely used in many industrial fields. What are the requirements for the working environment of laser cutting machines? Let's take a look at them together:

1. Climatic environment
If the ambient temperature is lower than 18 ° C or higher than 30 ° C, there is too much dust, and the air pollution is serious, then the machine is seriously damaged, and the failure rate shows an upward trend; The electrical accessories are easy to go wrong in a humid environment. Therefore, the user is specially reminded to improve the working environment and carry out daily maintenance of the machine;
2. Air suction device
It is necessary to regularly check and clean the air suction device and clean the air duct of the exhaust fan, otherwise it is easy to cause smoke and dust not to be discharged, which will cause pollution to the lens and laser tube, and at the same time, it will cause poor contact due to oxidation of all electronic parts of the machine;
3. Cooling system
Clean the water tank and water circuit frequently, and the temperature control point of the refrigeration temperature control water tank should be appropriate, otherwise it is easy to cause the laser tube to be damaged easily, the condensation power to drop, the cold head of the tube to fall off, the life of the tube to be greatly shortened, and sometimes it can not work, resulting in continuous tube replacement;
4. Working current
The laser tube cannot work at the light intensity of 90-100 for a long time; Rationalize the application of laser and save laser energy; The optical system should be clean and accurate, otherwise the laser tube will be prematurely aged and cracked. Therefore, the working time intensity of the laser machine should be adjusted at 50-60%, and then the working speed should be adjusted according to the materials. This is the best working state of the laser tube. It is better to equip the machine with a voltage regulator.