As a new type of laser cutting machine in the international market in the past 20 years, the optical fiber laser cutting machine has an absolute advantage over other similar products in terms of cutting speed and cutting quality. Today, let's look at the performance advantages of the optical fiber laser cutting machine:
1. Very stable cutting performance
During the cutting process, the fiber laser cutting machine uses the world's top fiber lasers at this stage, such as IPG, Ruike Laser, Chuangxin Laser, etc. This fiber laser has a long service life and stable performance, so the machine is quite stable. On the premise that the machine has no problems, there are almost no other factors affecting the normal operation of the machine except human factors, and the failure rate is low. Therefore, the optical fiber laser cutter can cut the workpiece for a long time, and its performance is very stable.
2. Advanced cutting process
As we all know, the cutting principle of the fiber laser cutting machine is to use high-performance fiber lasers. In the process of workpiece cutting, the laser will emit countless high-energy and high-performance laser rays. With the huge energy generated by the laser rays, the metal surface to be cut can be instantly vaporized, and then the very hard metal interface can be easily cut and deeply cut. As far as the cutting technology at this stage is concerned, this process is also the most advanced cutting process. In addition, the cutting speed is extremely fast, which makes it easy to cut the workpiece. At the same time, the cutting is accurate, which can meet some high requirements for cutting.
3. Mechanical operation is very convenient
When the customer uses the optical fiber laser cutting machine, all the transmission of the machine is completed through optical fiber, which saves a lot of manpower and material resources. At the same time, there is an intelligent operating platform, which forms a human-computer interaction system. Only one operating engineer is required to operate the cutting perfectly. The cutting workpiece only needs to draw cutting graphics in the operating system. The operating engineer clicks to confirm, and the machine will unconditionally perform cutting workpiece, It is very convenient.
The performance advantages of fiber laser cutting machine make it widely used in many industries.