For non professionals, optical fiber laser cutting machine belongs to the scope of cutting machine. If optical fiber laser is used, the cutting range should be very wide, and the cutting effect is better than other methods. In fact, it is not accurate. There are different types of cutting machines. Each type of cutting machine has its own use and advantages and disadvantages. Today, we will look at what materials cannot be cut by dual drive optical fiber laser cutting machine, and what should be paid attention to in the cutting process.
1. As a kind of metal laser cutting machine, the dual drive optical fiber laser cutting machine can only cut metal plates, not non-metallic materials, such as cloth, stone, glass, etc. This is mainly because the wavelength range of the optical fiber laser cutting machine is not within the absorption range of the non-metallic materials, which is not suitable for absorption, can not achieve the cutting effect, or even damage the processing materials.
2. It is not recommended to cut rare metal materials, such as aluminum and copper, for a long time with a dual drive optical fiber laser cutter. Because rare metal materials are all high reflective materials, high reflective materials are easy to damage the protective lenses on the laser head. Long term cutting of rare metal materials will not only cause unsatisfactory cutting effect, but also increase the use of consumables, thus increasing production costs.
3. With different laser power, the thickness of metal plate cut by the dual drive fiber laser cutter will also change. The higher the power is, the greater the thickness of metal plate cut. The smaller the power is, the smaller the thickness of metal plate cut. On the contrary, the thinner the metal plate is, the faster the cutting speed is.