It is now April, and it is about to enter summer. The highest temperature in South China has exceeded 30 degrees. With the passage of time, the temperature will gradually increase from south to north. People are afraid of heat in such high temperatures, as well as optical fiber laser cutting machines. Because summer is the season of high temperature events, the cutting machine equipment also needs to be cooled, so that some high temperature events can avoid damage to the machine, thus affecting the normal operation of the machine, How to cool down the machine in summer?
1. Accelerate the heat dissipation of the machine. Each qualified optical fiber laser cutting machine is equipped with a dust removal system and a heat dissipation system, which should be opened in time during the laser cutting process to achieve timely dust removal and heat dissipation to reduce the temperature in the machine;
2. Control the temperature of the chiller. The water in the chiller should be distilled water or purified water, and it needs to be cleaned and replaced regularly to avoid scale in the laser and water pipe, which will affect the performance of the laser. At the same time, the temperature difference between the water in the chiller and the outside of the chiller should not be too large, and it should be set at 25-30 ℃. When the temperature is high in summer, the working pressure of the chiller system is large, so the temperature of the chiller should be adjusted in time to adapt to the indoor temperature;
3. The machine room is equipped with air conditioner to regulate the temperature. The installation environment should also be considered when installing the machine. It is better to have a supporting air conditioner room, so that the indoor temperature can be controlled at any time, providing a good working environment for the laser cutting equipment;
4. Although the optical fiber laser cutting machine can work 24 hours, the equipment should not work for a long time in the high temperature in summer, and should be adjusted in real time. The working time of the machine should be adjusted shorter than that in other seasons;
In general, cooling the optical fiber laser cutting machine in summer can effectively slow down the aging time of the machine, extend the service life of the machine, and reduce the maintenance cost,
The cooling of laser cutting machine in summer can effectively increase the service life of the machine, reduce maintenance costs, and achieve stable, efficient and high-precision cutting.