Optical fiber laser cutting machine is a high added value and high-value product with different power and configuration and large price difference. Sometimes customers choose low-power optical fiber laser cutting machine in order to save costs, with the mentality of being able to use and cut. However, if it is necessary to cut thick plates and cut in batches for a long time, and the machine can only meet the cutting requirements, then a long time of full load cutting will cause great damage to the machine and have side effects, Now let's look at the side effects?        
1. Fiber laser and consumables: there is a certain time limit for the replacement of the consumables, but if the full load cutting takes a long time, the replacement cycle will be shortened, and the service life of the fiber laser will also be lost;
2. Laser power supply: It is easy to damage the motor when the optical fiber laser cutting machine works at full load. For example, if we drive at high speed for a long time, the motor will be damaged faster when it operates at full load. The same is true for machines and equipment;
3. Water chiller: when starting and stopping the chiller with high frequency, it consumes a lot of internal compressors and main components, which will shorten the service life of the chiller;
Of course, in addition to the above, other parts will also have an impact when the machine runs at full load. Therefore, we should regularly check and maintain the machine to ensure the normal operation of the optical fiber laser cutting machine.