The most important and expensive part of all components of the fiber laser cutting machine is the fiber laser, so special care should be taken during and after the installation to prevent damage. Now let's look at how to correctly install and use the fiber laser to play its role.
1. The fiber laser cannot be tilted or inverted, and must be placed vertically, neatly and neatly;
2. The fiber laser should preferably be used in the working environment where the temperature is 5-39 ° C and the humidity is lower than 90%;
3. The ground shall be flat, and there shall be no large vibration near the fiber laser;
4. After the fiber laser is installed, the movement of the laser generator and optical path should be minimized;
5. It is recommended to use a forklift to transport the fiber laser with high safety;
At present, the mainstream laser manufacturers commonly include IPG, Ruike Laser and Chuangxin Laser in China. The fiber lasers produced by them basically have cushions and wheels, which can be adjusted as needed and can be used after adjustment.