In the process of processing and cutting, the optical fiber laser cutting machine will produce dust and smoke, which on the one hand will adversely affect the health of the operating engineer, on the other hand will pollute the precision part of the machine, which may not have any impact in a short time. A long time will inevitably affect the service life and cutting performance of the machine, and thus affect the development of the entire industry. Therefore, dust removal equipment should be equipped, It can effectively reduce the dust and smoke generated in the cutting process.
In general, we will divide the lower part of the machine workbench into a number of chambers with the same geometric dimensions arranged longitudinally and the main suction duct in the front, which is connected with the dust remover; A valve is arranged between each chamber and the main air suction duct, and the machine control valve controls the air cylinder through the air inlet pipe and the air outlet pipe; The small room is equipped with a hopper, and both ends are welded with end plates for sealing. Several ventilation holes are opened at the lower part of both sides of the hopper. The ventilation process of the system is controlled through the opening and closing of the valves. This method saves land and improves the ventilation effect.
The other dedusting device includes the main body, main box and control cabinet, and is equipped with an exhaust hood to absorb all the smoke and dust generated during the operation of the laser cutting machine, which can ensure a clear working vision and improve the working efficiency. The exhaust hood can also ensure that the residues will not splash around during the operation, protect the safety of operators, improve a layer of protection, and improve the popularity and applicability of the device.
In general, although dedusting equipment is not a mandatory item when users purchase laser cutting machines, it is necessary to equip dedusting equipment for many benefits, which can effectively ensure normal production and the health of operators