In recent years, with the development of laser cutting technology, optical fiber laser cutting machines are increasingly widely used in all walks of life, which also involves many problems. Among them, how to maintain the equipment is a common concern of users. Let's take a look at how to effectively maintain the machine.
1. Maintenance of dedusting equipment
If the dedusting equipment is used for a long time, it will accumulate a lot of solid dust. If it is not cleaned in time, it will make a lot of noise, which is not conducive to dedusting. Therefore, when this problem is found, the power should be turned off in time, and the solid dust in the dedusting equipment should be cleaned up before continuing to use. It is better to clean it every other time;
2. Maintenance of chiller
The cooling water in the chiller should be replaced regularly, usually once a month. Because the chiller is used to cool the fiber laser and other parts of the equipment, the cooling effect can only be achieved by ensuring the water quality, so the water in the chiller must be replaced regularly. If the water quality is not up to the standard, it is easy to deposit dirt;
3. Maintenance of optical lenses
There are several optical lenses, protective lenses, focusing lenses, etc. on the cutting head of the optical fiber laser cutting machine. During the cutting process, the lenses are easy to be stained with dust or other pollutants, which may cause damage. Therefore, the lenses should be checked regularly, wiped, and protected;
4. Maintenance of guide rail rack
In the process of machine cutting, some solid dust will fall on the guide rails and racks. Long time cutting will lead to the accumulation of solid dust and increase the wear of the guide rails and racks. The guide rails and racks are relatively precise accessories. Long time wear will damage the guide rails and racks, thus affecting the normal cutting. Therefore, the guide rails and racks should be cleaned regularly in a timely manner, and the dust on the rack should be cleaned and greased in a timely manner. The guide rails should be lubricated with lubricating oil.
The above is our routine maintenance of the machine, which will help our machine work better and reduce unnecessary losses.