The laser pipe cutting machine focuses the laser emitted from the laser into a laser beam with high power density through the optical path system, and replaces the traditional mechanical cutter with an invisible beam. It has the characteristics of high precision, fast cutting, not limited by the cutting pattern, material saving, smooth incision, low processing cost, etc. What factors will affect the service life of the equipment in the process of use?
1. The laser cutting head is a very fragile and easily damaged part on the pipe cutting machine. We need to take care of it carefully in the process of use to prevent it from colliding, clean and maintain the cutting head regularly, check the straightness of the cutting machine's track and the flatness of the machine tool regularly, and adjust it in time if it is found abnormal, otherwise the cutting accuracy of the workpiece will be affected, the metal laser cutting machine will affect the quality of the workpiece Reduce the cutting speed.
2. The wear between the mechanical bearings of the laser pipe cutting machine in use will affect its service life. In the process of use, we should regularly apply lubricating oil to the gear bearings to reduce mechanical wear and keep the machine running normally.
3. During processing, a lot of waste dust will be produced. If it is not cleaned frequently, it will lead to dust accumulation, inaccurate pipe cutting accuracy, and rack jamming. Therefore, we should also keep the environment around the machine clean.
Laser cutting machine is still common in people's life. In the process of gradual development of industry, the importance of processing technology in the industry is gradually reflected. As a relatively advanced processing technology, laser cutting technology metal laser cutting machine technology has a positive role in promoting the development of the entire industry, both from its development prospects and the importance of application. The application of laser cutting technology not only improves the working efficiency of processing, but also makes the process more refined. As we all know, when we use the laser cutting machine to process metal materials, there will occasionally be large cutting gaps, which will cause the cutting accuracy of the workpiece to decline and fail to meet our requirements.
1. First of all, we should check whether the focus of the optical fiber laser cutter is correct. The form of optical fiber focus adjustment is automatic and automatic. Manual focusing is easy to be forgotten by technicians. Especially after changing or cleaning the lens, adjust the focus.
2. The lens is the key reason. Check whether the lens is damaged or dirty, because this situation will cause the laser to scatter, causing the laser beam to thicken. Replacing or cleaning the lens is the only way.
3. The placement of the laser tube is also a very important aspect. Check the quality of the laser spot. If there are two points or the light spot is not round, the support point of the laser tube may need to be adjusted. Many people will ignore this reason, which also needs attention.
The large laser cutting seam is not a big problem, but the equipment needs to be maintained after a period of processing and production. In fact, there are some small exceptions in the use process, which requires us to do a good job in the maintenance work in order to ensure the long-term cutting and stable operation of the laser cutting machine and create value for customers. Metal laser cutting machine