If we master the core requirements, the probability of problems will be greatly reduced. Here is a brief introduction to the key points of using the laser cutting machine.
1、 The double focus laser cutting head is a vulnerable item on the laser cutting machine. Long term use will cause damage to the laser cutting head.
2、 Check the straightness of the optical fiber laser cutting machine track and the perpendicularity of the machine every six months, and timely maintain and debug if abnormal. If this is not done, the cutting effect may not be good, and the error will increase, affecting the cutting quality. This is a top priority and must be done.
3、 Use a vacuum cleaner once a week to remove the dust and dirt in the machine, and all electrical cabinets should be tightly closed to prevent dust.
4、 Check the steel strip of the optical fiber laser cutting machine frequently to ensure that it is tight. Otherwise, if there is a problem during operation, people may be injured and even killed. The steel belt looks like a small thing. If something goes wrong, it is still a bit serious.
5、 All guide rails of optical fiber laser cutting machine shall be cleaned regularly to remove dust and other sundries, to ensure normal equipment, rack shall be wiped frequently, and lubricating oil shall be added to ensure lubrication without sundries. The guide rail shall be cleaned and lubricated frequently, and the motor shall also be cleaned and lubricated frequently, so that the machine can move better and cut more accurately, and the quality of the cut products will be improved.