To master the essentials, it will be relatively simple for us to use the laser cutting machine. In order to make everyone better use of the laser cutting machine, the following is a detailed introduction to the operating points of the laser cutting machine.
1、 Check the straightness of the laser cutting machine rail and the perpendicularity of the machine every six months, and timely maintain and debug if any abnormality is found. If this is not done, the cutting effect may not be good, and the error will increase, affecting the cutting quality. This is a top priority and must be done.
2、 Use a vacuum cleaner once a week to remove the dust and dirt in the machine, and all electrical cabinets should be tightly closed to prevent dust.
3、 Always check the steel belt of the laser cutting machine to ensure that it is tight. Otherwise, if there is a problem during operation, people may be injured and even killed. The steel belt looks like a small thing. If something goes wrong, it is still a bit serious.
4、 All guide rails of the laser cutting machine shall be cleaned regularly to remove dust and other sundries, to ensure that the normal rack of the equipment shall be wiped frequently, and lubricating oil shall be added to ensure lubrication without sundries. The guide rail shall be cleaned and lubricated frequently, and the motor shall also be cleaned and lubricated frequently, so that the machine can move better and cut more accurately, and the quality of the cut products will be improved.