Aluminum plate is always a problem of laser cutting. High resistance materials are widely used in today's processing and manufacturing industries. Some types of laser cutting machines are difficult to complete this kind of cutting, because aluminum plates are highly resistant materials, their laser absorption is low, and it is difficult to cut aluminum plates by laser. However, due to its extensive processing needs, we must consider how to use laser to cut aluminum plates quickly and safely.
Due to the light absorption of materials, many machines will fail during forced cutting, such as unstable operation or automatic shutdown, which will seriously affect the service life and processing progress of the equipment.
Laser cutting aluminum plate can cut 2000W thick 6-8mm aluminum plate, 4000W thick 15mm aluminum plate and 6000W thick 20mm aluminum plate.
The laser cutting machine can now process copper, aluminum and other highly corrosion-resistant materials, but it requires high power, so there will be no burrs and cracks during the cutting process. Especially for aluminum cutting, it needs to cut at an appropriate speed, otherwise there may be cracks. Proper speed increase is an important method to avoid cracks without affecting the quality. Like copper, aluminum and other high resistance materials, laser equipment can also cut.
In the process of aluminum plate processing, some conditions should be noted. Aluminum materials are not resistant to high temperature and are prone to burrs during cutting. Processing techniques require patient debugging. At the same time, it should be noted that the speed should not be too fast, and burrs are easy to appear in the cutting process. Too slow cutting speed will cause cracks near the cutting mouth, which will also affect the cutting quality.