Chuyu Laser recommends that you choose 1000W optical fiber laser cutting machine to cut 3-4mm stainless steel materials (500W optical fiber laser cutting machine is applicable to a small amount of 3mm stainless steel cutting, rather than a large amount of processing). However, due to the light absorption characteristics of metal materials, general laser cutting machines cannot be used to cut metal materials. The laser cutting machine has higher requirements for the processing of stainless steel metal materials. The cutting of stainless steel materials must be completed by metal optical fiber laser cutting machine.
Using the 500W or 1000W Chuyu Optoelectronic fiber laser cutting machine, the remarkable advantage of laser cutting is fast: the cutting speed can reach 15m/min, much faster than wire cutting.
Good cutting quality: non-contact cutting, small thermal effect of cutting edge, basically no thermal deformation of workpiece, completely avoiding material collapse during blanking, and generally no secondary processing is required for cutting edge.
High precision: the positioning accuracy is 0.05mm, the repeated positioning accuracy is 0.02mm, and the processing accuracy can be controlled within 0.1mm.
The cutting surface is smooth: there is no burr on the cutting surface, and the surface roughness of the incision is usually controlled within Ra12.5.
No damage to the workpiece: the laser cutting head will not contact the material surface to ensure that the workpiece will not be scratched during processing.
Material saving: use computer programs and professional software to scientifically and reasonably integrate products of various shapes to improve the utilization rate of materials.
When choosing laser cutting machines, many customers will compare the prices of laser cutting machines they need according to different brands. Laser cutting 3mm stainless steel is a common steel plate thickness, mainly used in kitchen, household appliances, office supplies, filing cabinets, handicrafts and other fields. Laser cutting equipment is widely used in advertising, furniture, leather, decoration, handicrafts and other non-metallic materials for fine carving, carving and cutting.
Not only that, high-power metal laser cutting machine and optical fiber laser cutting machine have also attracted the attention of small and medium-sized enterprises. This laser cutting machine is mainly used for sheet metal processing, rapid cutting and molding of carbon steel, silicon steel, stainless steel and other metal materials. In the market, the power of metal laser cutting machine has been widely used from 500W to 2000W. Each laser cutting machine has its particularity, which also reflects its value.